{"title":"2 SPACE MODULES","description":"","products":[{"product_id":"serge-modular-oscillator","title":"1973 OSCILLATOR","description":"\u003cp\u003eThe 1973 Paperface Oscillator is a single oscillator design that offers some simple yet highly effective inputs and outputs. Onboard is a sine to sawtooth waveshaper with full voltage control over the shape. This module also offers two frequency inputs that can be used to pitch the oscillator in musical scales or be used as a frequency modulation input. Hard sync is also available. The 1973 Oscillator offers AC and DC outputs for use in many different applications.\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mouser.com\/ProjectManager\/ProjectDetail.aspx?AccessID=f9c0e7fd0d\" target=\"_blank\"\u003eOscillator BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/file\/d\/15Q1ncrHFW0HxBuSrxZR-5S341HYKgXHp\/view?usp=sharing\" target=\"_blank\"\u003eOscillator BOM List\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1hkM4sOPQhiOUhlLgBUnOdcurQepUqPH8?usp=sharing\" target=\"_blank\"\u003eOscillator Panel\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/prismcircuits.net\/products\/serge-modular-led-driver\" target=\"_blank\"\u003eOptional LED Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/prismcircuits.net\/products\/led-assembly\" target=\"_blank\"\u003eLED Assembly\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCalibration\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMonitor the sawtooth waveform on your oscilloscope with the frequency control set to fully CCW. Adjust the \u003cstrong\u003eTUNING\u003c\/strong\u003e trim pot so that the lowest frequency reads 5-10Hz. \u003c\/p\u003e\n\u003cp\u003eNow turn the frequency knob fully CW and adjust the \u003cstrong\u003eFM DEPTH \u003c\/strong\u003etrim pot so that the max frequency reads between 10-12kHz\u003c\/p\u003e\n\u003cp\u003eNow monitor the sine\/saw wave output on your oscilloscope with the saw\/sine shaper control set to fully CCW. Adjust the \u003cstrong\u003eSINE SHAPE\u003c\/strong\u003e trim pot until you have a perfectly symmetrical sine wave on the top and bottom portion of the waveform. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note that the 1973 Oscillator does not track 1V\/Oct. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\" mce-data-marked=\"1\"\u003ePower Consumption\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e+12V - 25mA\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e-12V - 8mA\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Inspired by Serge Modular Music Systems*\u003c\/em\u003e\u003c\/p\u003e","brand":"Serge Modular","offers":[{"title":"Default Title","offer_id":39566974091469,"sku":"","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/products\/SergeOscillator.png?v=1631634436"},{"product_id":"serge-modular-1973-vcf","title":"1973 VCF","description":"\u003cp\u003eThe 1973 Paperface VCF is a state variable 2-pole resonant filter that offers lowpass, bandpass and highpass outputs simultaneously. \u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mouser.com\/ProjectManager\/ProjectDetail.aspx?AccessID=e3c77d4b9a\" target=\"_blank\"\u003e1973 VCF BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1OFYHMgw740hx00w8GhraNY4BQmUP5TVE?usp=sharing\" target=\"_blank\"\u003e1973 VCF Panel\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe two CA3080's are not included in the BOM. This part can be purchased \u003ca href=\"https:\/\/prismcircuits.net\/products\/rochester-ca3080\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCalibration\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eInput a sawtooth waveform into the audio input of the VCF with the cutoff frequency control fully counter clockwise. Patch a cable out of the lowpass filter and monitor the output level. Adjust the \u003cstrong\u003eFREQ ADJ\u003c\/strong\u003e trim pot on the back of the module so that that the audio just starts to fade out and can't be heard. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\" mce-data-marked=\"1\"\u003ePower Consumption\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e+12V - 25mA\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e-12V - 18mA\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eJ201 SMT Replacement \u003c\/strong\u003e\u003c\/span\u003e(included in BOM)\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003eThe J201 JFET transistor in a \u003cspan data-mce-fragment=\"1\"\u003eTO-92-3 through-hole package is becoming harder to find. In this instance, it is possible to use the more common MMBFJ201 SMT SOT-23 package in place of the through-hole package. The photo below shows the proper way to install the SMT package in the through-hole footprint. Please check your manufacturers datasheet to provide the proper pinout for your specific part. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/files\/Serge_1973_VCF_Filter_480x480.jpg?v=1627967133\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/files\/Serge_1973_VCF_Filter_480x480.jpg?v=1627967133\" data-mce-fragment=\"1\"\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003cem\u003e*Inspired by Serge Modular Music Systems*\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Serge Modular","offers":[{"title":"Default Title","offer_id":39566987100365,"sku":"","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/products\/Serge73VCF.png?v=1631634461"},{"product_id":"serge-modular-bi-directional-router","title":"BI-DIRECTIONAL ROUTER","description":"\u003cp\u003eThe Paperface BI-DIRECTIONAL ROUTER is three switches which route one input to either of the two outputs or either of two inputs to one output according to a pulse or control voltage level. \u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003ca data-sanitized-target=\"_blank\" href=\"https:\/\/www.mouser.com\/ProjectManager\/ProjectDetail.aspx?AccessID=acac08429e\"\u003eBi-Directional Router BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca data-sanitized-target=\"_blank\" href=\"https:\/\/drive.google.com\/drive\/folders\/1I9OBmrHmbp_vtAjHTami5ny0Y_dXJk0h?usp=sharing\"\u003eBi-Directional Router Panel\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCalibration\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAdjust each trim pot on the back of the module until you get +7V and -7V on the appropriate sides as labeled on the PCB. There are 2 test points on each section for use with a multimeter. It is best if you have all IC's uninstalled while calibrating the voltages. Then install the IC's and adjust the voltages as needed. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Inspired by Serge Modular Music Systems*\u003c\/em\u003e\u003c\/p\u003e","brand":"Serge Modular","offers":[{"title":"Default Title","offer_id":39567006433485,"sku":"","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/products\/SergeBi-DirectionalRouter.png?v=1631634550"},{"product_id":"serge-modular-noise-source","title":"NOISE SOURCE","description":"\u003cp\u003eThe NOISE \/ RANDOM generates both white and pink noise waveforms. The S\/H source provides the necessary input for a sample and hold function to produce equi-probable random voltages. Additionally, the NOISE \/ RANDOM functions as a random voltage generator which can be activated by pulses or from the pushbutton on the front panel. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mouser.com\/ProjectManager\/ProjectDetail.aspx?AccessID=bb264e41c0\" target=\"_blank\"\u003eNoise\/Random BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1wFFy4CWadury0neAkl4T7Tv3LcIn3wAc?usp=sharing\" target=\"_blank\"\u003eNoise\/Random Panel\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/prismcircuits.net\/products\/led-assembly\" target=\"_blank\"\u003eLED Assembly\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe CA3130 is not included in the BOM. This part can be purchased \u003c\/span\u003e\u003ca href=\"https:\/\/prismcircuits.net\/products\/intersil-ca3130\" style=\"font-size: 1.0em;\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note that the \u003cstrong\u003e100n\u003c\/strong\u003e capacitor marked on the PCB should be a MKT or similar\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCALIBRATION\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE - \u003c\/strong\u003eThis module requires some patients and quality tools to calibrate correctly. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003eI found this module works best when 2 PN4250's (they should be installed backwards into the BC557 footprints) are used in place of the top two BC557's. Although 2 BC557's can be used as well. Order 10-15 of the chosen transistor so that the noise section can be properly calibrated. It is best to push the transistor into the footprint without soldering the parts in so the noise can be properly adjusted as described below. \u003c\/p\u003e\n\u003cp\u003eMonitor the WHITE noise output and patch it into your Oscilloscope. Set the scope to read RMS measurements so you can determine the noise's range that should be in the range of 1.3v and 1.68v. Anything over that and the noise waveform may start to clip, limiting the range of the random outputs internally.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eBridge the S\u0026amp;H pads after calibrating the noise section. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatch the random DC output to an oscillator to monitor the random voltage output. The BLANK resistor on the PCB is used to center the waveform coming into the S\u0026amp;H section, this will only be needed if you find that the random outputs are not center properly. The value will need to be determined on a case by case basis and should be no larger that 3k. All this will vary on each build. I've noticed 75% of the time the BLANK resistor will not need to be installed. \u003c\/p\u003e\n\u003cp\u003eLED buffer is also available on the PCB if you plan to install LED indication on your module. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100k* resistor outlined in white can be omitted. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBelow is the White Noise clipping. You will need to choose the right transistor to get the correct Noise waveform as shown in the next photo.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/files\/SDS00005.png?v=1773352756\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a perfect symmetrical White Noise waveform. Even on both the top and bottom and perfectly centered.  \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/files\/SDS00007.png?v=1773352772\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e*\u003cem\u003eInspired by Serge Modular Music Systems*\u003c\/em\u003e\u003c\/p\u003e","brand":"Prism Circuits","offers":[{"title":"Default Title","offer_id":39753691365581,"sku":"","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/products\/SergeNiseSource.png?v=1631635470"},{"product_id":"serge-modular-triple-comparator","title":"TRIPLE COMPARATOR","description":"\u003cp\u003eThe Paperface TRIPLE COMPARATOR consist of three independent functions which are useful in the production of square waves and variable pulse waves. The comparator reference level can be a time-varying control voltage, a complex audio signal, or a fixed preset voltage. Additionally, the comparators are useful for level detection and for logic decisions based on amplitude. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca data-sanitized-target=\"_blank\" href=\"https:\/\/www.mouser.com\/ProjectManager\/ProjectDetail.aspx?AccessID=17a3dd6fdf\"\u003eTriple Comparator BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca data-sanitized-target=\"_blank\" href=\"https:\/\/drive.google.com\/drive\/folders\/1FBMlIeFhES28Yi_sjRnjDFi433_l6UwK?usp=sharing\"\u003eTriple Comparator Panel\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCalibration\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cspan data-sanitized-data-mce-fragment=\"1\"\u003eConnect a bipolar AC coupled triangle wave into the input located above the potentiometer. To achieve an AC coupled triangle waveform, cycle a near by ENVELOPE GENERATOR and turn both potentiometers to equal values to output a triangle waveform. Send that triangle waveform into the AC input of a GATE module. Now you have created an AC couple triangle waveform to help calibrate the TRIPLE COMPARATOR. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sanitized-data-mce-fragment=\"1\"\u003eSet the potentiometer fully counterclockwise and adjust the trimmer for a 50% duty cycle. For best results, an oscilloscope is required. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sanitized-data-mce-fragment=\"1\"\u003e*\u003cem\u003eInspired by Serge Modular Music Systems*\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Prism Circuits","offers":[{"title":"Default Title","offer_id":39753701753037,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/products\/SergeTripleComparator.png?v=1631636033"},{"product_id":"serge-modular-send-receive","title":"SEND RECEIVE","description":"\u003cp\u003eThe Paperface Send Receive module acts as an external effect interface. Can also be used as a simple banana to 3.5mm \/ 1\/4\" jack converter. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca data-sanitized-target=\"_blank\" href=\"https:\/\/www.mouser.com\/ProjectManager\/ProjectDetail.aspx?AccessID=d0cf8cf81b\"\u003eSend Receive BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca data-sanitized-target=\"_blank\" href=\"https:\/\/drive.google.com\/drive\/folders\/17qlcYxUUvEvMHIkLANs6PDNd20BZheJ0?usp=sharing\"\u003eSend Receive Panel\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou will need to determine if you want to use 1\/4\" jacks or 3.5mm jacks. BOM includes 1\/4\" jacks. 3.5mm jacks can be found \u003ca data-sanitized-target=\"_blank\" href=\"https:\/\/www.mouser.com\/ProductDetail\/Switchcraft\/35PM1?qs=%2Fha2pyFadujThCV9AFfbMiHVVAwqEa7fui26JTEb71c%3D\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Panel will need to be drilled out for the 1\/4\" jacks before any paper panels are mounted to the panel. 3.5mm jacks DO NOT require any drilling.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFollow the \u003ca data-sanitized-target=\"_blank\" data-sanitized-data-mce-href=\"https:\/\/prismcircuits.net\/pages\/general-build-guide\" data-sanitized-data-mce-fragment=\"1\" href=\"https:\/\/prismcircuits.net\/pages\/general-build-guide\"\u003eGeneral Build Guide\u003c\/a\u003e for this module. Requires no setup or calibration.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*\u003cem\u003eInspired by Serge Modular Music Systems*\u003c\/em\u003e\u003c\/p\u003e","brand":"Prism Circuits","offers":[{"title":"Default Title","offer_id":39753702441165,"sku":"","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/products\/FC283E0A-77AD-4CCC-ACC4-092C15D1FFD2.png?v=1631635766"},{"product_id":"serge-modular-sequential-switch","title":"SEQUENTIAL SWITCH","description":"\u003cp\u003eThe Sequential Switch is a bi-directional switch for routing signals throughout your system in a sequential fashion. This module has 4 inputs\/outputs and one common input\/output. Stages can range from 2, 3 \u0026amp; 4 selections. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mouser.com\/ProjectManager\/ProjectDetail.aspx?AccessID=9d0a4b0252\" target=\"_blank\"\u003eSequential Switch BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1SjtiweKqoJM-lEHydoRx2kegekROuPrk?usp=sharing\" target=\"_blank\"\u003eSequential Switch Panel\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/prismcircuits.net\/products\/led-assembly\" data-mce-href=\"https:\/\/prismcircuits.net\/products\/led-assembly\" target=\"_blank\"\u003eLED Assembly\u003c\/a\u003e x 4\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eFollow the \u003c\/span\u003e\u003ca href=\"https:\/\/prismcircuits.net\/pages\/general-build-guide\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/prismcircuits.net\/pages\/general-build-guide\"\u003eGeneral Build Guide\u003c\/a\u003e\u003cspan\u003e for this module. Requires no setup or calibration.\u003c\/span\u003e\u003c\/p\u003e","brand":"Prism Circuits","offers":[{"title":"Default Title","offer_id":39753703555277,"sku":"","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/products\/SequentialSwitch.png?v=1631635893"},{"product_id":"serge-modular-peak-trough","title":"PEAK \u0026 TROUGH","description":"\u003cp\u003eThe Paperface PEAK \u0026amp; TROUGH module functions as an analog logic module. The Peak side acts as an analog OR logic gate, and the Trough acts as an analog AND logic gate. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca data-sanitized-target=\"_blank\" href=\"https:\/\/www.mouser.com\/ProjectManager\/ProjectDetail.aspx?AccessID=9d3046aab0\"\u003ePeak \u0026amp; Trough BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca data-sanitized-target=\"_blank\" href=\"https:\/\/drive.google.com\/drive\/folders\/1sxX_wLTA_qJ1ZRl2gV-MIJLI4DJ4ZQ5Y?usp=sharing\"\u003ePeak \u0026amp; Trough Panel\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOptional MOD included in the BOM - \u003c\/p\u003e\n\u003cp\u003e2 x Potentiometers \u003c\/p\u003e\n\u003cp\u003e2 x 1N4148\u003c\/p\u003e\n\u003cp\u003e2 x 10k resistor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: If you DO NOT wish to add this mod please delete the quantities above from the BOM. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFollow the \u003ca data-sanitized-target=\"_blank\" data-sanitized-data-mce-href=\"https:\/\/prismcircuits.net\/pages\/general-build-guide\" data-sanitized-data-mce-fragment=\"1\" href=\"https:\/\/prismcircuits.net\/pages\/general-build-guide\"\u003eGeneral Build Guide\u003c\/a\u003e for this module. Requires no setup or calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*\u003cem\u003eInspired by Serge Modular Music Systems*\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Prism Circuits","offers":[{"title":"Default Title","offer_id":39753746350285,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/products\/49DF2E62-12F0-445A-8C63-2A69D04172E7.png?v=1631635509"},{"product_id":"serge-modular-vc-phaser","title":"VC PHASER","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe VC PHASER is perhaps the lowest noise and lowest distortion phase shifter available today. As an aid to recreating some of the subtle properties of phase delay in acoustic sounds, three separate outputs are provided with 360 degree, 720 degree, and 1080 degree of voltage controllable phase shift. A MIX output combines the 1080 degree phase shift with the input signal to produce the multiple notch filter effect that is usually associated with phase shifters. The VC Phaser's log-conforming characteristics and the manual and voltage controls enable ultra-smooth, precisely centered sweeps of phase shift for both spatial effects and timbral modification. (Written from the original documentation) \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mouser.com\/ProjectManager\/ProjectDetail.aspx?AccessID=a08f9a4b91\"\u003eVC Phaser BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/12SYqLaGCQzoxZpPZg265lEjGjDCPX9XF?usp=sharing\" target=\"_blank\"\u003eVC Phaser Panel\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eVactrols are now included in the BOM. They can also be sourced from the link below if Mouser is out of stock.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eXVive VTL5C3\/2 Vactrols can be sourced \u003ca href=\"https:\/\/www.amplifiedparts.com\/products\/optocoupler-xvive-vactrol-vtl5c-series\"\u003eHERE\u003c\/a\u003e. Module requires 3 Vactrols\u003c\/p\u003e\n\u003cp\u003eThe CA3046 can be found \u003ca href=\"https:\/\/www.amplifiedparts.com\/products\/transistor-as3046-array-5-matched-pair-14-pin-dip-npn\" target=\"_blank\"\u003eHERE\u003c\/a\u003e. CA3046 can be used in place of the CA3086.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eFollow the \u003c\/span\u003e\u003ca href=\"https:\/\/prismcircuits.net\/pages\/general-build-guide\" target=\"_blank\"\u003eGeneral Build Guide\u003c\/a\u003e\u003cspan\u003e for this module. Requires no setup or calibration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*\u003cem\u003eInspired by Serge Modular Music Systems*\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Prism Circuits","offers":[{"title":"Default Title","offer_id":39929456885965,"sku":"","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/products\/SergeModularPaperfaceVCPhaser.png?v=1631636186"},{"product_id":"serge-modular-analog-shift-register","title":"ANALOG SHIFT REGISTER","description":"\u003cp\u003eThe ANALOG SHIFT REGISTER is a 3 channel \"bucket brigade\" style sample and hold circuit that passes each voltage to the next corresponding step when a pulse is received at the clock input. Onboard is a gate to trigger converter with its own dedicated output to trigger other modules within your system. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mouser.com\/ProjectManager\/ProjectDetail.aspx?AccessID=51ae86ccc8\" target=\"_blank\"\u003eASR BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1iqHlsoYchQx_Jp8ECwQa1XE9vkd_SXPz?usp=sharing\" target=\"_blank\"\u003eASR Panel\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/prismcircuits.net\/products\/bi-polar-led-buffer\" data-mce-href=\"https:\/\/prismcircuits.net\/products\/bi-polar-led-buffer\" target=\"_blank\"\u003eOptional LED Driver\u003c\/a\u003e x 3\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/prismcircuits.net\/products\/led-assembly\" data-mce-href=\"https:\/\/prismcircuits.net\/products\/led-assembly\" target=\"_blank\"\u003eLED Assembly\u003c\/a\u003e x 3\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCalibration\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003eThis module requires pairs of resistors to be matched. Each highlighted pair of resistors should be matched to each other to give you the best outcome on the output buffers. There are also resistors marked *22k* that should be matched together as well. \u003c\/p\u003e\n\u003cp\u003e3 offset trim pots are provided to zero out the offset of each channel. It is recommended to build and test the module before installing these 3 trimmers. If you notice an offset voltage on each channel then you can go ahead and install these 3 trim pots to zero out each corresponding steps offset. \u003c\/p\u003e","brand":"Prism Circuits","offers":[{"title":"Default Title","offer_id":40149554168013,"sku":"","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/products\/SergeAnalogShiftRegister.png?v=1679764556"},{"product_id":"serge-modular-random-voltage-generator","title":"RANDOM VOLTAGE GENERATOR","description":"\u003cp\u003eThe RANDOM VOLTAGE GENERATOR produces random voltages which vary smoothly or in a stepped manner. Random timing pulses are also available. Rate of change of all outputs is voltage controllable over a wide temporal range. PLEASE NOTE: The noise source and S\/H source are built into the module and does not require the NOISE SOURCE module to function. White, Pink and the S\/H source are available via the corresponding pads located on the back of the module. These pad can be broken out to external jacks to offer a full range noise source. \u003cstrong\u003eNote\u003c\/strong\u003e - If you choose to add these options then the module will become a 3 column unit as shown in the Panel EXT file. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.mouser.com\/ProjectManager\/ProjectDetail.aspx?AccessID=92d6719f9b\"\u003eRandom Voltage Generator BOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cstrong\u003eJ201 SMT Replacement \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e(included in BOM)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1edMiCjNEMDn_jEpr0yinJzY1QcKTwzWz?usp=sharing\"\u003eRandom Voltage Generator Panel's\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/prismcircuits.net\/products\/led-assembly\" data-mce-href=\"https:\/\/prismcircuits.net\/products\/led-assembly\" target=\"_blank\"\u003eLED Assembly\u003c\/a\u003e x 3\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/file\/d\/16wr_SEZehsD9KRN3C5uNVAL_KgmlFqq8\/view?usp=sharing\"\u003e\u003c\/a\u003eThis module requires 2 CA3080's that can be purchased \u003ca href=\"https:\/\/prismcircuits.net\/products\/rochester-ca3080\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLED Drivers (optional) - 2 x \u003ca title=\"Go to W3Schools HTML section\" href=\"https:\/\/prismcircuits.net\/products\/bi-polar-led-buffer\"\u003eBi-polar LED Driver\u003c\/a\u003e, 1 x \u003ca href=\"https:\/\/prismcircuits.net\/products\/serge-modular-led-driver\" title=\"Go to W3Schools HTML section\"\u003eUni-polar LED Driver\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*\u003cem\u003eCAPACITOR X AND WHITE RESISTOR ARE NOT USED*\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCALIBRATION\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003cstrong\u003eNOTE - \u003c\/strong\u003eThe PN4250 in white is the Noise transistor and will require some measuring before soldering the component into place. It is best to just place the part into this footprint while doing your final measuring. Order about 10 extra components to ensure the quality of the overall functionality.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMonitor the WHITE NOISE pad output and patch it into your Oscilloscope. Set the scope to read RMS measurements so you can determine the noise's range that should be in the range of 1.3v and 1.68v. Anything over that and the noise waveform may start to clip, limiting the range of the random outputs internally.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNow probe all other pad outputs to determine the functionality of the module is working correctly. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce everything is working correctly, patch the stepped output into an oscillators frequency input. Now adjust the stepped trim pot so that the stepped output is at its max random voltage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOn to the timing adjust trim pot. This will set the overall frequency of the modules functionality. Adjust to taste. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\" mce-data-marked=\"1\"\u003ePower Consumption\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e+12V - 70mA\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e-12V - 58mA\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*\u003cem\u003eInspired by Serge Modular Music Systems*\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Prism Circuits","offers":[{"title":"Default Title","offer_id":40234552754381,"sku":"","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/products\/SergeModularRandomVoltageGenerator.jpg?v=1641602404"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/7385\/3901\/collections\/Serge_Modular_73-75_4_c1ec2248-305b-4b87-ae70-f3dd28c00466.jpg?v=1635483590","url":"https:\/\/prismcircuits.net\/collections\/2-space-modules-serge-modular.oembed","provider":"Prism Circuits","version":"1.0","type":"link"}